LuxSweet Digital Alarm Clock Wooden Digital Alarm ClockWood Fashion Multi-Function LED Alarm Clock with USB Power Supply Voice Control Timer Pattern-3

"LuxSweet" voice-activated digital LED alarm clock, a simple and elegant digital product made of fiber density board. Introduction: A. Time setting: (please refer to the manual) B. Date and alarm settings C.dP-1. dP-2, two mode conversions: D. Power saving mode: SD function (please refer to the manual) Temperature display setting: The default temperature display unit is (degrees Celsius). You can also switch to Fahrenheit. (please refer to the manual) Voice control function: The word function can only be used in the power saving mode. Anti-interference function: In the power-saving mode, in order not to disturb other people, just tap the top of the alarm clock to activate the alarm display. &RESET button: When the operation is abnormal, the RESET button restores the factory settings after the power is turned off. Fourth, electrical parameters: * Power adapter requirements: input voltage: AC110V~AC240V, 50 / 60HZ. Output voltage: DC5V / 500MA~1000MA. *Select battery power requirement: AAA * 4 battery standby. * In voice control mode, when the close sound is greater than 60 decibels, the display can be woken up. *Working temperature: 0°C~ + 50°C Five, note: * Please use in dry and ventilated environment, pay attention to moisture, not bumpy, high temperature; be careful not to drop to avoid damage. *When using this product, if the display is dark or flickering, the battery is low and the battery should be replaced. Prevent battery leakage and prevent damage to the product. If the normal running time cannot be maintained during a power failure, check if the internal battery (model: CR2032) is exhausted. Please replace the internal battery in time. * Use the product power adapter 5V / 500MA ~ 1000MA, the output plug matches the product socket.