LQ Industrial Disc Brake Pad 2PCS Rotor Brake Bike Repair Assistant Alignment Lengthen Spacers Bicycle Disc Brake Gap Regulator Mounting Kit Tools

Specification: Product Name: Gap Adjuster Packing: 2PCS Bicycle Disc Brake Gap Regulators Material: Stainless steel Dimensions: 85cm(3.35in)x14mm(0.55in)x2.7mm(0.11in) Features: Designed to adjust the gap between the rotor and brake pads. In the future, the distance between the disc and the disc can be kept consistent and completely parallel to ensure that the movement of the caliper piston is symmetrical to avoid excessive protrusion of the piston, and it is no longer necessary to adjust the caliper by hand to worry about rubbing the disc. It is suitable for all bicycles with line disc and oil disc clearance adjustment. Installation method: Clamp the disc brake alignment tool to any position on the edge of the disc rotor, then rotate the disc brake gap alignment tool to the position where the disc brake caliper is installed, put the caliper back, and tighten the screw, but do not tighten , Press the brake lever repeatedly. Squeeze the brake lever, tighten the caliper screw, then loosen the brake lever, rotate the disc rotor, and then remove the disc brake gap alignment tool. Note: Keep the adjustment sheet clean, and do not contaminate the oil, otherwise it will harm the disc and the incoming film.