Here comes the perfect solution for adding a VGA screen to your Raspberry Pi.
What is better, it is so much cheaper than an HDMI to VGA adapter.
This VGA connection is driven natively in hardware over the GPIO pins using a parallel interface and it takes around the same CPU load as the HDMI connection on board.
It is capable of displaying 1080P VGA video with zero CPU load.
You may drive this interface with the HDMI connection at the same time to even set up dual screens.
Specifications:
Compatible with Raspberry Pi 3/2/B+/A+ The VGA output supports resolution: from 640 x 480 up to 1920 x 1024 at 60fps.
With 6 bits per channel you have a maximum of 262144 colours.
Dimension: 64.00mm * 32.3mm
Weight: 16.5g
Features:
Easy to Set Up Easy to Configure Technology Support:
Edit /boot/config.txt file with vim.tiny or other editor. and modify as following: framebuffer_width=800 framebuffer_height=600 dpi_group=2 device_tree=bcm2710-rpi-3-b.dtb dpi_mode=86 dtparam=i2c_arm=off dtparam=spi=off dtparam=uart0=off dtparam=uart1=off dtoverlay=pi3-disable-bt-overlay dtoverlay=vga666 enable_dpi_lcd=1 display_default_lcd=1 force_pwm_open=0 dtparam=audio=on start_x=1 gpu_mem=128 Please disable the functions of all the GPIO Pins so that it can work properly 800*600 resolution is highly recommended as higher resolution will slow down your Pi and cost more RAM
Package Included:
1 * Raspberry PI 16 Bits I2C ADS1115 Module
What is better, it is so much cheaper than an HDMI to VGA adapter.
This VGA connection is driven natively in hardware over the GPIO pins using a parallel interface and it takes around the same CPU load as the HDMI connection on board.
It is capable of displaying 1080P VGA video with zero CPU load.
You may drive this interface with the HDMI connection at the same time to even set up dual screens.
Specifications:
Compatible with Raspberry Pi 3/2/B+/A+ The VGA output supports resolution: from 640 x 480 up to 1920 x 1024 at 60fps.
With 6 bits per channel you have a maximum of 262144 colours.
Dimension: 64.00mm * 32.3mm
Weight: 16.5g
Features:
Easy to Set Up Easy to Configure Technology Support:
Edit /boot/config.txt file with vim.tiny or other editor. and modify as following: framebuffer_width=800 framebuffer_height=600 dpi_group=2 device_tree=bcm2710-rpi-3-b.dtb dpi_mode=86 dtparam=i2c_arm=off dtparam=spi=off dtparam=uart0=off dtparam=uart1=off dtoverlay=pi3-disable-bt-overlay dtoverlay=vga666 enable_dpi_lcd=1 display_default_lcd=1 force_pwm_open=0 dtparam=audio=on start_x=1 gpu_mem=128 Please disable the functions of all the GPIO Pins so that it can work properly 800*600 resolution is highly recommended as higher resolution will slow down your Pi and cost more RAM
Package Included:
1 * Raspberry PI 16 Bits I2C ADS1115 Module
