LE Handheld Metal Scanner Detector Security Wand Pinpointer

INTRODUCTION This is a high performance Hand Held Metal Detector designed to meet the exact requirement of the security industry. Typical uses will include body search for offensive weapons in crowd control, airport and border security, checking parcels and letters for metal objects and anywhere that hidden metal needs to be detected OPERATION This metal detector operates on one 9 volt standard or rechangeable battery. To install the battery, slide off the battery cover and place the battery into its compartment while matching the +/- symbols. Turn the unit on by pushing the on/off switch until it clicks on and the green LED is lit. The detector is now operational although an increase in sensitivity and depth range can be achieved by turning the sensitivity adjuster until the red LED is lit and a constant audio tune is heard. Turn the sensitivity adjuster(anti-clock wise) until the red LED just goes out and the tone fades. The handheld metal detector is now tuned for optimum sensitivity and depth range. Holding the unit with the detection face towards the surface, sweep backwards and forwards continuously at a height of 10-30 mm above the area to be scanned The presence of metal will be indicated by the audio warning tone and the red light coming on. If the detector is held still over a metal object, the detection signal will automatically reduce, therefore it is important that the unit is continually scanning the surface when is use.