KUNPENG - 12267plus 12264plus 12438plus 12436 1SET 4 Piece Sewing Roller Foot Set fit for JUKI CONSEW Singer Brother

PART#:12267+12264+12438+12436 1SET ITEM: NEW,FULLY ADJUSTABLE Roller Presser Foot Set fit for most Single-Needle,High-Shank Industrial Sewing Machines Large (#12267) & Small (#12264) Roller Feet with Narrow Needle Plate (#12438) and Narrow,Single-Row Feeder (#12436) USES: These NEW,Serrated Roller Presser Feet fit for most Single-Needle,High-Shank Industrial Sewing Machines. These Serrated Roller Presser Feet are perfect fit for sewing Leather,Nylon,Plastics,Foam Rubber,Laminated Fabric/Material,etc. Significantly improves feeding of these materials through your machine Allows “Free-Style” stitching with very sharp turns Improves visibility of stitches while sewing shapes,box and bar/flag tacks Attaches simply; similar to standard presser foot fit for improved control and consistent stitches,with new Feeder,requires: Centering of the Feeder stroke within the Feeder slots in the Needle Plate. This is required if your Feeder is hitting the Needle Plate in either the front or back during the feeding motion. To make this adjustment,loosen either of the screws under the Feeder (NOT the Feeder screws themselves). Only loosen one or both of these screws enough to allow the Feeder to be moved with your fingers slightly from front to back within the Needle Plate Feeder slots. Do NOT loosen so much that there is no feeding motion. Turn the Hand-Wheel slowly in the normal direction to make certain that the Feeder is centered within the Needle Plate Feeder slots. Tighten screws after Feeder centered. Also note that the height of the Feeder may also require adjustment. fit for : Virtually all Single-Needle,High-Shank Industrial Sewing Machines