KNACRO TB6560 3A Stepper Motor Driver Stepper Motor Driver Board Single-axis Controller

Working voltage DC 10V-35V. DC24V switching power supply is recommended. Using high-speed optical coupling 6N137, ensuring high speed without losing step. Use TB6560AHQ chip, there are low-pressure shut-off, overheating parking and over-current protection circuit to ensure optimum performance. Rated maximum output: ± 3A, peak 3.5A. Within 42, 57 for a two-phase stepper 3A / four-phase / four-wire / six-wire stepper motor is not suitable for more than 3A stepper motor. Automatic half current function. Subdivision: full step, half step, step 1/8, 1/16-step, up to 16 segments. Operating voltage: DC 10V-35V (DC24V power supply is recommended). Using high-speed optical coupling 6N137, ensuring high speed without losing step. Use TB6560AHQ chip. Rated maximum output: ± 3A, peak 3.5A. Automatic half current function. Subdivision: full step, half step, step 1/8, 1/16-step, up to 16 segments. Size?75*50*35mm(L*W*H). Weight:71g. Thick teeth radiator, good heat dissipation. Ultra-small, the overall size: 62mm * 75mm, installation of four mechanical positioning hole size: 65mm * 55, hole size ?3mm Attenuation adjustable (Decay Mode) 0 %---- no decay mode --- 25% of the slow decay mode --- 50% of the normal mode 100% - Fast Decay mode ----- Decay mode of regulation by different motors to match impedance, thereby eliminating the noise when locked stepper motor and motor movement in the shake. Automatic half current setting (Torque Settings) %---- No pulse when the current 20 to normal operating current of 20% 50 %---- no pulse current 50% to normal operating current 75 %---- no pulse current 75% to normal operating current 100% --- no pulse when the current 100% to normal operating current Package Included: 1*TB6560 3A stepper motor driver.