Kingston KCV234 Series Brass In-Tank Check Valve, 1/2" NPT Inlet x 1/2" NPT Outlet NPT

The Kingston KCV234 series in-tank check valve is designed for use on the discharge line of lubricated or non-lubricated air compressors to prevent back flow from the air tank. It's designed to use for vertical pipe lines. The valve body is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. The disc is made of Teflon for high/low temperature applications. It has female NPT threads for connecting to male threaded pipes, creating a tighter seal than straight threads. The maximum pressure rating is 400 pounds per square inch (psi), and the working temperature range is -250 to 350 degrees Fahrenheit. This valve is tested in National Board Approved Quality Assurance Process. Check valves have two ports and restrict the flow of fluids and other loose materials through a pipe or passageway to one direction. Flow enters through one port and exits through the other, closing when flow reverses or stops. Two common types of check valves are ball cone valves and swing check valves. A ball cone valve utilizes a spring-loaded ball seated against a cone-shaped interior surface to stop the flow of fluid in a forward direction, and a swing check valve has a movable disc on a hinge to block reverse flow. Check valves are rated by their cracking pressure (the minimum upstream pressure required for the valve to operate), and they are used in various water, gas, air, and steam lines. Kingston manufactures industrial valves. The company, founded in 1909, and headquartered in Torrance, CA, meets ASME standards, and ANSI Y14.5 dimensioning and tolerance guidelines.