Open this key case way:
There is a screw on the back that needs to be removed first.
Then the two silver side pieces slide to the side (one up, one down) and then pulled outward.
the left side (buttons facing toward you) goes down and the right goes up.
They are a little difficult to slide by hand, I recommend using a flat head to push down and up on each side.
Key Blade: Yes (Uncut)
Transponder Chip: NO
Electronics/Battery: NO
Non OEM ,Make sure the same with your original key
Package Included: 1 X Uncut Flip Key Shell fit for Toyota (Not included chips)
Models for Reference:
2004-2009 MAZDA 3
2004-2006 MAZDA 6
2000-2007 MAZDA MPV
2001-2003 MAZDA Protege
2002-2003 MAZDA Protege 5
Note: Please compare the size and shape with your old key prior to purchase.
Features:
Non OEM ,4 buttons(lock,unlock,and panic,Trunk),Make sure the same blade type
Package Included: 1 X Uncut Remote Key Shell Case fit for Toyota key with 4 buttons (Not included chips)
1- you need to check with your local dealer to verify it's compatibility with your vehicle.you need confirm your current remote key looks the same with ours.
2- This is just a Empty key shell, there is no interior (remote/electronics/transponder chips) inside.
3- If you have a worn & broken Key Blank /Remote Case, all you need to do is take the internal electronics (include immobilizer/transponder chip) from original remote
and place them to our key shell, then the uncut keyblade will have to a locksmith or a dealer to be cut to match your car.
This item isn't a remote,it is just a Key Case shell.
There is a screw on the back that needs to be removed first.
Then the two silver side pieces slide to the side (one up, one down) and then pulled outward.
the left side (buttons facing toward you) goes down and the right goes up.
They are a little difficult to slide by hand, I recommend using a flat head to push down and up on each side.
Key Blade: Yes (Uncut)
Transponder Chip: NO
Electronics/Battery: NO
Non OEM ,Make sure the same with your original key
Package Included: 1 X Uncut Flip Key Shell fit for Toyota (Not included chips)
Models for Reference:
2004-2009 MAZDA 3
2004-2006 MAZDA 6
2000-2007 MAZDA MPV
2001-2003 MAZDA Protege
2002-2003 MAZDA Protege 5
Note: Please compare the size and shape with your old key prior to purchase.
Features:
Non OEM ,4 buttons(lock,unlock,and panic,Trunk),Make sure the same blade type
Package Included: 1 X Uncut Remote Key Shell Case fit for Toyota key with 4 buttons (Not included chips)
1- you need to check with your local dealer to verify it's compatibility with your vehicle.you need confirm your current remote key looks the same with ours.
2- This is just a Empty key shell, there is no interior (remote/electronics/transponder chips) inside.
3- If you have a worn & broken Key Blank /Remote Case, all you need to do is take the internal electronics (include immobilizer/transponder chip) from original remote
and place them to our key shell, then the uncut keyblade will have to a locksmith or a dealer to be cut to match your car.
This item isn't a remote,it is just a Key Case shell.
