Jumper-XYZ R900 Mini Receiver R900 900MHz 915mhz Long Range R1 Receiver D16 2.4G Sbus for T18 T16 T18 Pro Remote Control (R900 Mini 900MHz RX)

Warm Tips: When the receiver loses the signal, the green light is off and the red light is flashing slowly. Jumper R900 915MHz receiver Details :  The working frequency of the receiver is 915MHZ, compatible with the FRSKY R9 series RF module. 915MHZ working frequency, suitable for long range flight. The signal penetration is strong, the anti-interference ability is good, and the signal is more stable and reliable than ordinary 2.4G. The receiver's factory built-in firmware can only directly link with the JUMPER T18 series remote control. Jumper R1 receiver Details :  It is compatible with all devices using the Frisky D16 mode, with integrated redundancy, telemetry and smart port enable, and the IPEX connector makes it easier to replace the antenna. Technical Parameters: Number of channels: 16ch (SBUS) RSSI (Signal Strength Indication) output: 0-3.3v Data return: S.port Operating voltage range: 4.0~6V Operating current range: 80mA@5V Effective distance: full distance (>1.5km) Compatibility: D16 mode FrSky Taranis D16 Mode Volume: 20*15*4mm (without antenna) Weight: <2g Bind mode: Press and hold the receiver's frequency button, turn on the power, the red and green lights are always on, and the receiver enters the frequency mode. The remote control turns on the frequency. The receiver is successfully paired and the green light flashes slowly. The remote control exits the frequency, the receiver is powered back on, and the green light is on. When the receiver loses its signal, the red light is on.