JOYO Guitar Effect Pedal Power Supply Isolated 9V 12V 18V 100mA 500mA 10 Outputs Jacks with Isolate ShortCircuit and Overload Protection JP02

JOYO Power Supply for Guitar Pedal (JP02),directly sold by manufacturer of JOYO Technology Co.,LTD which established at 2006. Introduction: 7 channels 9V/100mA output, 1 channel 9V/500mA, 2 channels 100mA output 12V/18V each, to meet the power supply requirements of any different pedals. Output 1-7th: All DC 9v power output with the maximum current of 100mA,are suitable for ordinary analog effectors. Under the circumstances of all LED lights on, instantaneous overcurrent in certain output would lead to the corresponding LED light's flash and the currents of this channel limit to 100mA.That is to say, output 1-7 might not be able to work properly if the connected digital effectors are of larger power consumption, then you need to use output 8th. Output 8th: Also DC 9V Power output with maximum current of 500mA,is suitable for digital effectors and DC 9V low-power digital guitar amplifiers. When instantaneous overcurrent occurs in this channel, the corresponding LED light would be flashing and the currents limit to 500mA. Used the high-current output step-down switching type integrated voltage regulator circuit produced by National Semiconductor Corporation. The chip has perfect protection circuit, including current limit and thermal shutdown circuit. The peripheral components form a high-efficiency voltage regulator circuit. Specifications: Input voltage: AC 100-240V 50/60Hz, DC18V Output voltage: 9V, 12V,18V Output polarity: external positive and internal negative Dimensions:160mm*53mm*36mm Weight: 380g. Package included: 1x JOYO JP-02 Guitar Pedal&Amp Power Supply 1x DC18V Power Adapter (150cm) 2x Polarity Reversal Cable (10cm) 10x DC Power Cable (60cm) 1x User Manual.