JOOWIN WiFi Range Extender | WiFi Signal Booster | WiFi Repeater | 2.4 & 5.8GHz Dual Band 1200Mbps 802.11ac Tech | WiFi Amplifier with 4×3dBi High Gain Antenna for Home (Only Support Repeater Mode)

Welcome to JOOWIN and wish you a good experience. Please feel free to contact us via: YIYUANUS@163.com if you have any questions. ? How to install? Step 1?Plug in and turn on the extender, wait about 2 minute till the red indicator light off. Enter "WLAN Setting" and connect to Wi-Fi “JOOWIN_XXX_2 G” or “JOOWIN_XXX_5 G”. Step 2?Open Google / Safari browser and Log IP "192.168.10.1" , Enter the default password "admin", Click “SET PASSWORD”. Step 3?Scan and select your WiFi.Enter your WiFi password, click “Save Setting”. Step 4?Completed setting, reconnect new WiFi “XXX-2G” or “XXX-5G”. ? FAQ: Q1. What‘s the role of WiFi extender? A: Boosting the range of your existing WiFi and eliminate signal dead zones. Please note that it can't increase your WiFi speed of your router, the wifi speed will be reduced due to conversion loss. Q2. where shall I place the WiFi extender? A: We would suggest that setting up successfully, please move this WiFi extender on the half way between your router and the weak signal area. Note: the location must be within the range of your existing WiFi router network. Q3. How to reset the WiFi extender? A: Press the WPS/Reset button of your extender for 10 seconds, then wait to restore factory settings. You can begin to set up it again after the indicator from light off to light up. Q4. Why the WiFi keeps disconnecting? A: We suggest you to reset the WiFi extender and update the firmware as following: 1. Go to www.joo-win.com, and search"JW-WR768AC" and download the firmware. 2. load in IP "192.168.10.1". 3. Click "system tools" on upper right corner and choose "upgrade firmware", then upload the file you download recently, click “upload.” 4. At last, setting it according the instruction above "How to install".