JMT USB 3.0 Ethernet Adapter 3 Port USB 3.0 HUB 10/100/1000 Mbps PCI-E to RJ-45 Gigabit Network LAN USB PCI Express Ethernet Card

Specifications: 1. RJ45 Lan Card + 3port usb3.0 (External 2-port USB3.0 + Internal 20pin Header can convert 1-port USB3.0 ) 2. SATA 15Pin power connector 3. PCI Express USB Lan Ethernet Card PCI-E RJ45 USB Adapter 4. PCI Express Card to 3port USB3.0 + RJ45 Gigabit ethernet 5. USB transfer data speed 5Gbps 6. Ethernet transder date speed 10/100/1000Mbps 7. Key features( Gigabit Ethernet Network LAN card ) 8. Compatible with USB 2.0 and USB1.1 devices 112. Supports simultaneous operation of multiple USB 3.0 and USB 2.0 devices 9. Supports 2 downstream ports for all speeds 10. Bus-powered mode and no external power required for most of peripherals 11. Power connector available for high current consumption peripherals 12. 3 external 5Gbps Super Speed USB 3.0 Ports+ RJ45 1000mbps ethernet lan port 13. Support full-duplex transmission,IEEE802.3x flow control&half-duplex backpressure flow control 14. Single Chip USB3.0 to 10/100 / 1000M Gigabit Ethernet controller 15. Supports 10 Mb/s and 100Mb/s N-Way Auto-negotiation operation. 16. Supports Suspend/Resume detection logic. 17. Support IPv4 and IPv6 packet (COE), can effectively reduce the load on the CPU 18. Supports Wake on LAN functions 19. Fully compliant with Single-lane(x1) PCI Express 2.0 specification 20. 4 pin connector supports extra power, no external power is needed 21. Fully Plug & Play and Hot Swap Compatible connect 22. System Requirement: PCI-E Slot (Not fit in a standard PCI slot, only PCIe) 23. Drive support Window 2000 XP/VISTA/7/8/10 Mac Size: 120*75*18.5mm Weight: 50g Tips: The Internal 20pin Header CAN NOT convert two port USB3.0, can conovert One port USB3.0 ONLY!  Package included: 1 x PCI-E to External 2-port USB3.0 + Internal 1-port USB3.0 + RJ45 Gigabit Network Card