JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0 140PSI Universal for Auto Truck SUV Motorcycle ATV RV

JIFETOR Fuel Injector Pump Pressure Gauge Kit 1x 3-1/2" Large Dial Pressure Gauge 1x 15"L Long Hose with Drain hose 1x 8"L Short Hose 13x Adapters 1x Aluminum Tee & Brass Fittings 2x Cut Hoses 2x Hose Clamps 1x Instruction 1x Red Blow Molding Case 15"L x 11"W x 3"H APPLICATION RANGE 1. Fuel injection pressure is less than 140PSI: perfect for most gasoline/gas engine fuel injection system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine. 2. Check if your vehicle's fuel pressure can be tested by one of following connection styles: Hook up fuel pressure test port directly 14"L long hose brass fittings is used for the 1/4" SAE standard schrader valve on the fuel rail or fuel pump. The 8"L short hose for M6 fuel pressure test port, and M8/M10/M12/M14 adapters for the corresponding test port on fuel rail In-line connection Aluminum tee with brass fittings allows to test the fuel pressure for most vehicles, by splicing in-line between the fuel pump and engine NOTE 1.Please wear gloves and goggles when use 2.Use by professional or under the guidance of a professional 3.Always refer to equipment manufacturer's operation instruction and recommended readings 4.Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system. Proper fuel pressure is vital for engine operation and performance 5.Before making connections and testing, place a dry chemical (Class B) fire extinguisher nearby. 6.Gasoline is highly flammable. Do not smoke, or test near open flames or a source of electrical sparks, or hot manifolds or other engine components. 7.Perform service in a well-ventilated, outdoor location 8.Make sure all connections are tight to avoid fuel leaks. Or use PTFE tape if needed.