PACKING LIST
1x 3-1/2" Pressure Gauge with 40" Long Hose and 1/8" NPT Brass Adapter
1x 3/8" NPT Male x 1/8" NPT Female Brass Adapter
1x 1/8" NPT Female x 1/8" NPT Female Brass Adapter
1x 1/4" NPT Male x 1/8" NPT Female Brass Adapter
1x 1/8" NPT Male x 1/8" NPT Male Brass Extension Adapter
1x 1/4" NPT Male x 1/8" NPT Male Brass Adapter
2x 1/8" NPT Male x 1/8" NPT Female Brass Adapter(90 Degree Elbow)
2x 1/8" NPT Male x 1/8" NPT Female Brass Adapter
2x 1/16" NPT Male x 1/8" NPT Female Brass Adapter
1x Customized Blow Molding Case, 12-3/4"L x 10"W x 2-1/2"H
1x Instruction
EASY TO OPERATE
1. Remove low oil pressure switch
2. Attach tester using appropriate adapter(s) for the engine
3. Start engine
4. Read the pressure on the gauge
5. Verify vehicle oil pressure is normal against manufacturer's recommendations
6. Remove tester and turn off the engine
7. Replace the low oil pressure switch
DIAGNOSTIC RESULT
Please refer to equipment manufacturer's operation instruction and compare to the manufacturer's recommended readings, to check if the reading is out of the normal range. And check if the dashboard light works well or not
Below the minimum oil pressure: blocking oil strainer or oil filter, broken pressure-limiting valve spring , poorly working oil pump, low oil viscosity
Above the maximum oil pressure: high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open
NOTE
1. Please wear gloves and goggles when use
2. Test oil pressure by professionals or under the guidance of a professionals
3. You can use Teflon tape to wrap around thread connector to get better sealing
JIFETOR Engine Oil Pressure Gauge Transmission Fluid Diagnostic Tester Tool Kit 12PCS 500psi Automatic Gearbox Pressure Meter with Hose and Adapters
Was:
$99.88
Now:
$49.94
- SKU:
- ST417934
- UPC:
- 690770904068
- Condition:
- New
- Availability:
- Free Shipping from the USA. Estimated 2-4 days delivery.