JIFETOR Brake Caliper Press Tool 360 Degree Swing Ratchet Expander Wrench Car Wheel Piston Spreader for Single Twin Quad Piston Disc Brake Caliper

HOW TO CHECK IF YOU NEED THIS TOOL OR NOT? 1. You will do some brake jobs 2. Your disc brake system has twin and quad piston fixed calipers, or single and twin piston floating calipers 3. Your caliper pistons do not require being turned while pressing them back 4. The spreader can expand from 1-1/2" to 2-1/2". If your caliper is wider, you can use old pads to lay across and then use this to push pistons back in 5. You want to save your time and effort, and protect your piston from a block of wood, a C clamp LABORSAVING RATCHET DESIGN 360 degree swing ratchet designed spreader, it is easy to get into place and use from any direction SUPERIOR SPREADING PLATES Two 1/8" thick spreading plates keep parallel, make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation HANDY LEVER HANDLE Blue soft cushion covered lever handle, skid resistance and feel good, will not hurt your hand after using CONVENIENT REVERSING SWITCH There is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates NOTE 1. Please wear gloves and goggles when use 2. The brake caliper press tool should be used by professional or under the guidance of a professional 3. Always refer to equipment manufacturer's operation instruction 4. Because of ratcheting mechanism, both spreading plates need pressure to catch the ratchet, to move the plates together/apart 5. This brake caliper press tool suits for disc brake, not for drum brake 6. You can search B085THCFPJ for bigger one