Product parameters:
External SMA interface antenna design, ISM band, 2.54mm in-line, compact size, convenient for embedded applications
Support six-channel data reception (one-to-six)
Support GFSK/FSK and other general modulation modes
Support 2Mbps/1Mbps/250Kbps data rate, and set different transmit power
Multi-frequency point: 126 frequency points, meeting the needs of multi-point communication and frequency-hopping communication, 2400MHz~2525MHz, 1MHz frequency-hopping step
LDO with internal integration of high PSRR
Wide power supply voltage range: 2.7~3.6V, typical 3.3V The average emission current is as low as 80mA (17dBm) Receiving sensitivity: -90dBm@1000kbps
Transmitting power can be up to 20dBm
Four-wire SPI interface is adopted, and the speed can reach 10MHz
Hardware interrupts the output of receiving and sending data Support 1-bit RSSI output
Working temperature: -20 ?~60 ?
The best transmission distance: at the rate of 250BPS in the open area, the test distance of transmitting and receiving 10 bytes of data is about 1000 meters at most
Antenna gain: 2.5dBi, antenna and module have been matched and tested, do not replace the antenna
Electrical characteristics
Supply voltage: 2.7V-3.6V
Current Consumption
Sleep mode: 30uA
Standby mode: 60uA
Rx states: 20.5mA@1MBPS
Tx states: 80mA@17dBm
Transmitter Part
Tx data rate: 1000Kbps-2000Kbps(Typ: 1000Kbps)
Frequency range: 2400MHz-2483.5MHz
Output power: -0dBm-20dBm(Typ: 17dBm)
Receiver Part
Receiver sensitivity: -90dBm@ 1000Kbps
Saturation: -23dBm
Adjacent channel rejection: 21dB (Desired channel 3dB above the sensitivity limit. 1MHz channel spacing)
Alternate channel rejection:30dB?Desired channel 3dB above the sensitivity limit. 1MHz channel
JESSINIE 2Pcs NRF24L01+PA+LNA Wireless Module XL24L01-D03 Wireless Transceiver 2.4GHz 1000m Long Distance with Antenna for Arduino Anti-Interference
Was:
$81.88
Now:
$40.94
- SKU:
- ZD102599
- Condition:
- New
- Availability:
- Free Shipping from the USA. Estimated 2-4 days delivery.