Jellas 26PCS 3 x 21-Inch Aluminum Oxide Sanding Belts 406080120180240 Assorted Grits Abrasive Belts for Belt Sander

Why Choose Jellas Abrasives Belt? Based on years of professional workshop experience and long-term belt sander manufacturing experience, Jellas has developed a set of advanced and complete abrasive programs after thousands of tests. The carefully selected materials ensure absolute durability and each piece of sanding belt combines the full wealth of experience with the passion of the Jellas employees and is suitable for surface grinding on wood, metal, plastic, filler, removal of layers of old paint, intermediate grinding and rust removal. How to install abrasive belt? 1.Plug the sander into a power point and with the sander belt tight, press the trigger switch and then release it. The belt rotates for a short period. 2.While the belt is running, adjust the tracking adjustment knob to align the belt to the centre of the roller. 3.Repeat the trigger action and tracking adjustment until the belt is correctly aligned. 4.Run the sander for a minute or so to ensure correct alignment before using the sander on a workpiece. Precautions for Using Abrasive Belt: Do not use the same sanding belt for wood and metal. Metal particles become embedded in the belt and will scour a wooden surface. How to choose the right belt? Use a coarse grit to sand down rough finishes, medium grit to smooth the work and finee grit to finish off. It is the best to make a trial run on a scrap piece of material to determine the optimum grades of sanding belt for a particular job. Package Included: -4pcs x 40 grit -4pcs x 60 grit -8pcs x 80 grit -4pcs x 120 grit -3pcs x 180 grit -3pcs x 240 grit