Japard Tire Depth Gauge Digital Depth Gauge Digital Tire Depth Measurements LCD Display Tire Tread Depth Gauge Tool with Inch and MM NO Fractions Display Conversion of 0-1 inches 0-2.54cm

?For the safety: The depper the tire thread is, the more advantage the thread pattern takes of in driving and mounting. So the wear diminishes the drainage performance especially when it rains. To make sure the consumption, very useful tool to have ready at home. ?HOW TO USE IT? Tire is compound of five components and the thread is the part that makes the direct contact with the road. To know the tire condition, it’s a good way to how worn the tread part is. 1. Insert battery in, "+" pole upward. 2. Switch on the tire depth gauge. 3. Put base on flat surface and press the bar downward. 4. Press Zero Button, the LCD screen will display 0.00mm/0inch. You can interchange between Metric/Inch system with button. 5. Put gauge on tire, hold stable and press bar tip into tyre profile. 6. Read profile depth value directly. 7. For accurate measuring, test it for several times. 8. Switch off the gauge, please remove battery when you don't use it for long periods. Notes: 1.Keep the gauge clean. 2.No water oil on the bar. 3.Display flashes when battery power in low. 4.Accidents display failure: take out battery for 30 seconds. Specifications: Size: LxWxD 4.6x2.36x35/64” / 11.7x6x1.4cm MAIN UNIT: 1.39oz /39g TOTAL Weight: 1.86oz / 52g Range: 0-25.4 mm / 0-1 inch Resolution: 0.01 mm / 0.005 inch Working Temp: 0-40 °C Battery: SR44 / LR44, 1.5 V Bar tip Material: stainless steel