JANBOTEK Replacement Battery Compatible with iPhone 6S - Repair Kit with Tools, Adhesive Strips - New 1715 mAh 0 Cycle Battery - 24-Month Warranty

PLEASE NOTE - This battery is compatible with all models IP6S - Please make sure that this product is compatible with your phone before purchase -The Gold handled screw driver is the outside tool for those 2 screws IMPORTANT TO KNOW ABOUT FOLLOWING POINTS - You must discharge phone battery below 20% and then turn off the phone before replacing. The full charged lithium-ion battery can catch fire accidentally when disassembling the phone. - The instruction only provides vitally important steps, it is unable to describe vividly how to replace the battery. In order to replace the battery more easily, we strongly recommend you to watch more relevant videos about replacing the battery on YouTube before you replace it. Especially attention for details of removing adhesive strips. - Due to the ribbon cable is the most important part of the battery, and it is extremely easy to be broken, please be extremely careful when you are taking the ribbon cable and DO NOT pull it hard. - Though the battery can be charged to 100%, it may drain quickly and decrease from 50% to 20% in a few seconds at the first time. But it doesn't mean the battery is defective. - Because the li-ion cells of a new battery are unstable, it will become normal after long-term use. IN THE BOX: - 1 Battery - 1 User Manual - 1 Spudger - 1 Suction Cup - 1 Opening Tool - 1 Sim Eject Tool - 1 Metal Tweezer - 1 Set of Adhesive - 1 Pentalobe Screwdriver - 1 Philips Size Screwdriver