Iron on Heat Transfer Vinyl Holographic Vinyl Glitter Neon Orange 9.8"x60" 0.8x5ft for Heat Press for T-Shirt and Garment

Glitter Heat Transfer Vinyl Roll Size: 0.8x5ft (9.8x60") Thickness:0.45mm Glitter Eye-catching Colors:Silver,Gold, Red, Black,etc Most fabrics are suitable:(cotton/polyester/cotton blend fabric) Do not use nylon, velvet, acrylic fabrics, leather, vinyl which will melt and ruin the material. Instructions: 1.Compatible with Cricut, Silhouette, Pazzles, Craft ROBO, QuicKutz, Brother ScanNCut, Craft Cutters, Die Cutters, Sign Plotters,etc. 2.Mirror/Reverse your image design. 3.Place vinyl (gloss side) onto cutting mat 4.Adjust proper blade speed and cutting pressure 5.Weed all of the excess slowly, leave the delicate design letters or graphics. 5.Make sure the finished product facing the right way once ironed onto your fabric. 6.Lay out the fabric.Place the t-shirt or fabric on a hard, flat clean dry surface. 7.Place a cardboard to protect transferred image onto both sides of t-shirt. 8.Set a heat press machine or iron from 150?(302?) to 160?(320?) 9.Press it only for 8-12 seconds at medium pressure. 10.Iron on the vinyl gloss side. Do not use steam iron. 11.Disperse the iron's heat evenly. Be sure to consistently apply pressure so the complete image is fully attached and prevent scorching the paper and cracking the image. 12.Wait for the vinyl to cool and gently peel off backing after few minutes. Note: Be careful not to burn yourself with the iron, and never leave an iron on unattended We recommend you to perform a test prior Hand wash your fabric gently with mild detergent Wait 24 hours after application to wash Turn the article of clothing inside before you wash it No bleach