The IR sensor cable could be plugged into an IR repeater/extender or A/V extender and serves as the external IR sensor for receiving the command signal emitted from an remote controller.
It could also be plugged into a video equipment that can support IR plug-in such as cable box, satellite receiver, home theater system and serves as an extended IR probe for receiving the input of IR remote control signal. [Note]: Not all audio/video equipments or extender kits offer such IR plug-in. Please check your video equipment first before purchase.
Its paired IR blaster/emitter wire is designed for blasting the IR remote command toward the A/V equipment to be controlled so the audio/video source equipment at distance can perform the commanded tasks such as play, pause, power on/off, volume up/down, channel +-, record and so on.
Each standard package includes 1 of IR remote sensor wire and 1 of IR remote blaster/emitter wires. Each wire has the same length of 6.5 feet.
Easy Wire Extension Both the IR blaster/emitter wires and the IR sensor wire all use the standard 3.5mm headphone plug. If you wish to extend these wires for longer cable length in the setup, you can simply use longer 3.5mm or 2.5mm audio extension cables to join with these IR input/output wires for cable extension if needed.
IR Remote Sensor Wire The IR remote sensor wire is used for receiving the control commands emitted from IR remote controller. It could be plugged into a video source device that can support IR plug-in or video/audio extender and serves as the IR sensor probe for receiving the input of IR remote control signal.
IR Remote Blaster/Emitter Wire The IR blaster/emitter wire is used for blasting the IR remote control signal toward the A/V equipment to be controlled to perform the desired tasks.
