iPower GLHTMTCONTROLV2 Digital Heat Mat Thermostat 40108 Degrees Fahrenheit Warming Pad Temperature Controller for Germination Seedlings Rooting Brewing Fermentation and Reptiles White

iPower heating pad thermostat can provide constant customized seed germination, crawling and brewing temperature. It is very suitable for maintaining the required temperature in home breeding and temperature control of reptiles and small pets. Features? 1. Digital temperature controller for heating pad. 2. Provide a constant temperature for the living environment of specific crops. 3. Specifications: 120V / 60HZ / 1000W. 4. LED indicator light and three-hole grounding plug are easy to operate. 5. Convenient LED heating and power indicator light allows you to check the status of the controller even in complete darkness. 6. Can be used with iPower heat mat to make a warm and comfortable growth environment for your reptile even in cold winter. Note: 1. Do not immerse the digital controller or thermostatic sensor probe in liquid or very wet soil. 2. Abnormal warning: If the thermostat displays "E1", it means the actual temperature is below 0°C or 32?. If the thermostat displays "E2", it means the actual temperature is higher than 60°C or 108°F. If the thermostat displays "E3", it means the temperature sensor is not working properly, please reinstall the sensor. 3. That the controller can only be used to power off heating equipment at setting temperature and does not increase the heating power of the heating equipment. 4. Heat mat thermostat can also be used to control the temperature of many other appliances as long as they don't exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat and set the desired temperature. Instructions: 1. To adjust the temperature setting, press and hold the "SET" button for 3 seconds to enter the temperature selection mode. 2. To display in degrees Celsius, press and hold the "~?" button for 3 seconds; press and hold the "~?" button for 3 seconds to display the temperature in Fahrenheit. 3. Press the "?" or "?" button to adjust the temperature you want to set. 4. Press the "SET" button again. This completes the set temperature. 5. When the unit is plugged into an electrical outlet, the "Power" LED becomes lit, the heat on only when the "Output" LED is lighted. When the preset temperature is reached, the "Output" LED will turn off and there is no power to the heat mat.