INSMA 433Mhz Wireless RF Switch Long Range DC 12V 4CH Channel Wireless Remote Control Switch, DC12V Relay Receiver Module, Transmitter Toggle Switch RF Relay (2 Transmitter & 1 Receiver)

It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter. Output working way: 1. Self-lock: connect the JP1 with the cutting out cap. 2. Jog: the cutting-out cap is non-occupation, JP1 and JP2 do not connect either. 3. Inter-lock: Connect the Jp2 with the Cutting out cap. Jog: press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control). Self -lock: press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control). Inter-lock: press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control). Using Instructions: 1. Press the learning code, the indicator flash, loosen finger, press any button of the remote control, the indicator flash 2 times and off, it means learning successfully. 2. It can learn various chips with the different code wireless remote control. 3. Remove/clean: press the learning button about 8 seconds , the indicator turn on to off, it means that it has been removed. Receiver: Size: 7.2 x 5.2 x 2.6cm 1. Working voltage: DC12V 2. Quiescent condition: Less than 6mA 3. Working temperature: -40 Degree +80 Degree 4. Receiver sensitivity: more than -105dBm 5. Working frequency: 433mhz 6. Output voltage: DC and AC is optional 7. Output current: Less than 3A 8. Max load current: 10A Remote control transmitter: Size: 5.8 x 3.9 x 1.4cm 1. Remote Distance: 328ft/100M 2. Operating Voltage: DC 12V 3. Frequency: 433mhz 4. Operating Current: 13 mAh 5. Code Type: Fixed code / Learning code Package Included: 2 x Transmitters 1 x Receiver 1 x Manual