Inkbird 10A 110V Digital Thermostat Temperature Controller with Heat and Cool Relays ITC-308 Homebrewing Breeding Incubation Sous Vide

Features: - Plug and play design, easy to use - Dual relay output, be able to connect with refrigeration and heating equipment at the same time - Support reading with Centigrade or Fahrenheit unit - Maximum output load: 1200W(110V) - Dual display window, be able to display measured temperature and set temperature at the same time - Temperature calibration - Compressor delay protection for refrigeration control - High and low temperature alarms are available - Over-temperature and sensor fault alarm - Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change Specification: Temperature Control Range: -50~120°C / -58~248°F Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±2°F (-58~160°F) Temperature Control Mode :On/Off Control, Heating and Cooling Input Power: 100 ~240VAC, 50Hz/60Hz Temperature Control Output: Max. 10A, 100V~240V AC Buzzer Alarm: High and Low Temperature Alarm Sensor Type: NTC sensor (Including) Sensor Length: 2m / 6.56 ft Body Dimension: 140x68x33mm (5.5x2.7x1.3 inch.) Socket Dimension: 85x42x24mm (3.3x1.7x1 inch.) Ambient Temperature: -30~75°C / -22~167°F Storage Temperature: -20~60°C / -4~140°F Humidity: 20~85% (No Condensate) Warranty: 1 Year Package Included: 1x ITC-308 Temperature Controller 1x Stainless Steel Probe Sensor 1x Manual