Inductive Proximity Sensor 5mm Distance 2-Wire NPN NO Proximity Switch Inductive Approach Normally Open Proximity Sensor Proximity Sensor TL-Q5MY1

Specification: 1. Detection distance: 5mm, ± 10% 2. Adjustment distance: 0-4mm 3. Latency distance: less than 10% of the detection distance 4. Detection object: magnetic metal (detection distance of non-magnetic metal decreases) 5. Standard test object: iron 18 * 18 * 1mm 6. Frequency response: DC: 0.5kHz, AC: 25Hz 7. Supply voltage: DC type: undulation (p-p) DC12-24V (6-36V) less than 10%. AC: AC110 - 220V (36 - 250V) 50/60 hz 8. Voltage: AC1000V 50 / 60hz 9. Influence of voltage: in the nominal supply voltage range of 15%, in the detection range of 10% when it is the value of the nominal supply voltage 10. Current consumption: Type N.P: less than 13mA Type D: less than 0.8mA One type: less than 1.7mA 11. Control output: Type N.P: less than 300mA Type D: less than 200mA One type: less than 400mA 12. Protection of the circuit: Type N.P.D: Reverse connection protection, overvoltage absorption, load short circuit protection A Type: surge absorption Action and backup: each - 30 - + 65 (ice, frost) 13. Ambient temperature and humidity: Action and save: 35 to 95% relative humidity each 14. Influence of temperature: - 30 - + 65 temperature range, 23 ?, plus or minus 15% + detection distance 15. Temperature range: 25 - + 60, 23 ?, plus or minus 10% + detection distance 16. Insulation resistance: more than 50 m? (500 megohms DC) 17. Material: shell: ABS, test surface: ABS Package list: Proximity sensor 1 * Note: 1. Please allow 0 ~ 1 error error due to manual measurement. Thanks for your understanding. 2. The monitors are not calibrated in the same way, the color of the item displayed on the pictures may be slightly different from that of the actual item.Please take the real as standard.