IDEAQTE 450ML Capacity 3Chamber Manual Hand Soap Dispenser Wall Mount Liquid Shampoo Shower Gel Dispenser Lotion Container for Office Bathroom Kitchen

100% Brand new and high quality. Specification: Capacity: 450ml/Chamber Material: ABS plastic. Size:inch Color: Silver Mount: Wall Mounted Package Included 1* Soap Dispenser(3-Chamber) 1* Screws 1*Mounting brackets If received any broken items, please don't hesitate to contact us through our store page. Proper installation steps: 1. Use a screwdriver to remove the cover of the bracket and insert a screwdriver into the hole in the bracket. 2. Select the location where you want to install the device, place the bracket on the wall and mark the location of the holes for the screw with a pen 3. After the holes of the screws are marked, remove the bracket. Dnll holes in the marked area on the surface with a drill. Place the pin(included) in the drilled hole, Reinstall the bracket, connect theholes with the pins, and secure the screws with a screwdriver 4. Replace the cover on the bracket back into the bracket. Until you heard hear a click 5. Take out the device. install the fulcrum into the hole in the wall bracket cover, and immediately place the device down until you hear a"click "sound. To secure the bracket perfectly, Place the key(included )in the hexagonal hole in the bottom part of the bracket cover. 6. Finally, put the key into the round hole on the lid and rotate to the right to open the device's lid. To prevent spilling, fill 3/4 of container with liquid soap. Close the lid and turn the key into the round hole to the left. Note: It is necessary to pull the crossbar several times, so that the equipment starts to flow out of soap several times. You can check the amount of soapy water in the device from the small side window. Important Note: ***for double or triple bodies, the bottom has been secured when packed into box, please DO use key to open the bottom lock before taking the dispenser off***