HzdaDeve Textured PEI Sheet and Smooth PEO Build Plate 235x235mm Spring Steel Print Bed Magnetic Base for K1/Ender 5 S1/Ender 3 S1 Pro/Ender 3 S1/Ender 3 V2 Neo/Ender 3 V2 3D Printer (PEO+PEI)

HzdaDeve Textured PEI Sheet and Smooth PEO Plate 235x235mm Spring Steel Print Bed Magnetic Heated Base for K1/Ender 5 S1/Ender 3 S1 Pro/Ender 3 S1/Ender 3 V2 Neo/Ender 3 V2 3D Printer?PEO+PEI) Specification: Product: PEI and PEO sheet with flexible magnetic base Material: PEI + PEO+ steel plate + Magnet Size: 235x235mm Double-sided bed: One side is a textured PEI bed, another side is a smooth diamond PEO sheet. Both sides of the spring steel build plate can be used. Compatible 3D Printer: for K1/K1 Max/Ender 5 S1/Ender 3 S1 Pro/Ender 3 S1/Ender 3 V2 Neo/Ender 3 V2 Package Include: 1 X Build Plate (PEI+PEO) 1 X Magnetic sheet Note: 1. Due to the thickness of the sticker, please adjust the height of your Z axis (the high temperature of the nozzle will damage the sticker). 2. When it get dirty on the surface, please just wipe down with isopropyl alcohol between prints for best results. 3. Light sanding with 600-1000 grit sand paper can be done after lots of printing to give the PEI sheet more life. 4. Note: PEI can bear high temperature, but over 130 degree would weaken the magnet of the magnetic base. 5. Please do not use our build plate with other suppliers’ magnetic bed together. After-Sale Service: If there are any questions, just contact us freely, a satisfactory solution will be provided within 24 hours