Any problem, feel free to message us.
Compatible with:
2011 - 2018 Dodge Durango
2011 - 2018 Jeep Grand Cherokee
2008 - 2018 Dodge Grand Caravan
How to replace with new HVAC blower motor?
1) Always wear eye protection and start with installation tools.
2) Locate the HVAC blower motor under the passenger side dash. Removing the dash may be necessary to access the blower motor on some vehicles.
(Note: On older vehicles, the blower motor may be located in the engine compartment on the passenger side firewall.)
3) Disconnect the blower motor electrical connector.
4) Remove the retaining screws to the blower motor assembly.
5) Remove the box and blower motor assembly.
6) Remove the blower motor retaining screws. Remove the motor from the box.
7) Compare the new blower motor to the old one to verify that you have the correct part. Install the new motor into the box and tighten the retaining screws. Re-install the blower motor assembly.
8) Connect the blower motor electrical connector.
9) Operate the heating and A/C system. Verify that the blower motor operates at all speeds and that the system produces hot and cold air.
10) Searching related installation video on the internet will be also recommended.
