HVAC Blower Motor Assembly 76902 700290 BM2202 2311849 2614656 72223FJ001 1750137 Heater Blower Motor with Fan Cage for Subaru Crosstrek/Forester/Impreza/WRX/XV/Subaru XV

FITMENT: * 2016-2017 Crosstrek 2.0L) * 2014-2018 Forester 2.0L) * 2014-2018 Forester 2.5L) * 2012-2016 Impreza 2.0L) * 2012-2014 Impreza 2.5L) * 2015-2019 WRX 2.0L) * 2015-2016 WRX 2.5L) * 2015-2019 WRX STI 2.5L) * 2013-2016 XV 2.0L) * 2013-2015 XV Crosstrek 2.0L) Replaces Part Numbers: * 76902 * 700290 * BM2202 * 2311849 * 2614656 * 72223FJ001 * 1750137 How to replace with new HVAC blower motor? * 1 Always wear eye protection and start with installation tools. * 2 Locate the HVAC blower motor under the passenger side dash. Removing the dash may be necessary to access the blower motor on some vehicles. (Note: On older vehicles, the blower motor may be * located in the engine compartment on the passenger side firewall.) * 3 Disconnect the blower motor electrical connector. * 4 Remove the retaining screws to the blower motor assembly. * 5 Remove the box and blower motor assembly. * 6 Remove the blower motor retaining screws. Remove the motor from the box. * 7 Compare the new blower motor to the old one to verify that you have the correct part. Install the new motor into the box and tighten the retaining screws. Re-install the blower motor assembly. * 8 Connect the blower motor electrical connector. * 9 Operate the heating and A/C system. Verify that the blower motor operates at all speeds and that the system produces hot and cold air. * 10 Searching related installation video on the internet will be also recommended.