HVAC Blower Motor Assembly 700202 79220SHJA01 79220SHJA02 8710342060 PM9314 Heater Blower Motor with Fan Cage for 20052010 Honda Odyssey; 20052009 Subaru Legacy Outback; 20042005 Toyota RAV4

FITMENT: * 2005-2010 Honda Odyssey 3.5L * 2008-2009 Legacy 2.0L * 2005-2009 Legacy 2.5L * 2008-2009 Legacy 3.0L * 2005-2009 Outback 2.5L * 2005-2009 Outback 3.0L * 2004-2005 Toyota RAV4 2.4L Replaces Part Numbers: * 700202, * 79220-SHJ-A01 * 79220-SHJ-A02 * 87103-42060 * PM9314 How to replace with new HVAC blower motor? * 1 Always wear eye protection and start with installation tools. * 2 Locate the HVAC blower motor under the passenger side dash. Removing the dash may be necessary to access the blower motor on some vehicles. (Note: On older vehicles, the blower motor may be * located in the engine compartment on the passenger side firewall.) * 3 Disconnect the blower motor electrical connector. * 4 Remove the retaining screws to the blower motor assembly. * 5 Remove the box and blower motor assembly. * 6 Remove the blower motor retaining screws. Remove the motor from the box. * 7 Compare the new blower motor to the old one to verify that you have the correct part. Install the new motor into the box and tighten the retaining screws. Re-install the blower motor assembly. * 8 Connect the blower motor electrical connector. * 9 Operate the heating and A/C system. Verify that the blower motor operates at all speeds and that the system produces hot and cold air. * 10 Searching related installation video on the internet will be also recommended.