HVAC Blower Motor Assembly 2C3Z19834AA 6L1Z19805B 700139 35061 PM9223 Heater Blower Motor with Fan Cage for 2003-2006 Ford Expedition 2004-2008 Ford F-150 2003-2006 Lincoln Navigator

FITMENT: * Expedition 2003-2004 V8 4.6L * Expedition 2003-2006 V8 5.4L * F-150 2004-2008 V6 4.2L * F-150 2004-2008 V8 4.6L * F-150 2004-2008 V8 5.4L * F-250 2004-2008 V8 4.6L * Freestar 2004-2007 V6 3.9L * Freestar 2004-2007 V6 4.2L * Lobo 2004-2008 V8 4.6L * Lobo 2004-2008 V8 5.4L * Lincoln Mark LT 2006-2008 V8 5.4L * Lincoln Navigator 2003-2006 V8 5.4L * Mercury Monterey 2004-2007 V6 4.2L Replaces Part Numbers: * 2C3Z19834AA * 6L1Z19805B * 700139 * 35061 * PM9223 * 2613971 * 1581168 * 75859 * 2311632 * BM1210 * FO3126125 How to replace with new HVAC blower motor? * 1 Always wear eye protection and start with installation tools. * 2 Locate the HVAC blower motor under the passenger side dash. Removing the dash may be necessary to access the blower motor on some vehicles. (Note: On older vehicles, the blower motor may be * located in the engine compartment on the passenger side firewall.) * 3 Disconnect the blower motor electrical connector. * 4 Remove the retaining screws to the blower motor assembly. * 5 Remove the box and blower motor assembly. * 6 Remove the blower motor retaining screws. Remove the motor from the box. * 7 Compare the new blower motor to the old one to verify that you have the correct part. Install the new motor into the box and tighten the retaining screws. Re-install the blower motor assembly. * 8 Connect the blower motor electrical connector. * 9 Operate the heating and A/C system. Verify that the blower motor operates at all speeds and that the system produces hot and cold air. * 10 Searching related installation video on the internet will be also recommended.