HTVRONT Blue Painters Tape - 1 Inch x 60 Yards x 3 Rolls Masking Tape, Multi-Surface Painters Tape, Paint Tape for Wall, Painting, Craft, Art Supplies, Clean Release Painter's Blue Tape

?ECONOMICAL SET: HTVRONT blue painters tape is made of eco-friendly crepe paper and superior rubber. And each roll of blue masking tape is 1 inch wide and 180 feet long. 3 rolls total 540 feet, suitable for you to use in a variety of ways.? ?KEY FEATURES? 1. Safe To Use: With the eco-friendly material, which is non-toxic, acid-free, and odorless. 2. Perfect Stickiness: The blue tape painters can be applied to smooth surfaces effortlessly, including dry walls, glass, wood, tile, and so on. 3. Clean Removal: Pulls away from a variety of surfaces cleanly, without residue. Leaves no marks, residue, or damage to your projects. 4. No Penetration: Effectively preventing paint from penetrating under the tape. 5. Easy To Tear: No scissors are needed to tear it.? ?WIDE APPLICATION? A must-have for every professional painter and handyperson to help you in all types of wall painting, trimming, caulking, painting, masking, and protection. Using the right blue tape will save you time, hassle and money. This blue painters tape can also be used for distance marking, office notes, and even entertainment. ? ?SURFACE PREP & TAPE APPLICATION: 1. Clean Surface: The surface should be clean, dry and dust-free so the tape sticks properly (Use a damp sponge and a few drops of dish soap mixed in a bucket of warm water). 2. Apply Tape: Lay the painters tape onto the surface, pressing down as you go. Don’t stretch the painting tape, or it may lift or break. 3. Secure the Tape with the Tool Make sure the paint tape is firmly adhered to the surface by pressing it down. Help yourself with a tool like a putty knife or credit card. 4. Wait: Wait about 30 to 60 minutes before you begin painting.? ?PROPER PAINTERS TAPE REMOVAL: 1. Wait: Wait until the paint is dry to the touch before removing the blue tape (Check the paint can for the manufacturer's dry times). 2. Burnish Tape's Edge Burnish the paint tape's edge with a plastic tool like a putty knife or credit card to ensure the painter's tape is completely flush with the surface. 3. Tape: Take your time, lift up the painter’s tape and pull it back on itself, removing at a 45-degree angle. 4. Clean Finish: You’ll get a sharp, clean line and a professional-looking paint job!?