HTV Heat Transfer Vinyl 12Inch x13Feet Rolls Iron On Vinyl for Silhouette Cameo Easy to Cut and Weed HTV Vinyl Roll Heat Transfer Vinyl for T-Shirts White

Perfect Heat Transfer Vinyl Rolls Don't waste time cutting and recutting so many times on cheap, poor quality Iron Vinyl. professional polyurethane Htv vinyl rolls is your best choice for artistic creation. Feature of Iron on vinyl Rolls : ?Made of Professional Polyurethane. -110 Microns ultra-thin & soft,Good Elasticity. - Heat Transfer Vinyl exterior surface is glossier,thinner and softer,Super Easy to Cut and Weed, effortless to apply. ?Washable & Durable , would not fade - Our Htv vinyl don't fade, peel or crack,even after many time washing cycles! Your designs will keep remain intact and colorful. How to Use your Heat Transfer Vinyl 1.Just before transfer, preheat your base fabric for 3-5 seconds to remove wrinkles and moisture,Make sure there is no wrinkling around the target area of the garments. 2.When using a steam iron, use a press cloth to avoid direct contact with the HTV film. 3.Know the type of fabric to see if the fabric is suitable for application. And make sure the fabric can withstand iron on temperatures. 4. Heat Press Machine Temperature: 300-320°F(150-160 °C), Time: 5-10 sec ,Pressure: about 10 lbs. 5.Please peel off heat press vinyl film after the design fully WARM or Cooling?Suggested that warm peel off?. 6.After Transfer,Wait at least 24 hours before washing.Always wash inside-out.Do not dry clean.Do not bleach. Iron on vinyl recommend uses ?cotton, polyester, cotton / polyester blends materialsBest on cotton, polyester, or cotton-polyester blends. ?Materials such as waterproof coating (down jackets/windbreakers) are not durable materials for HTV vinyl. Package includes: 1x Heat Transfer Craft Vinyl HTV Rolls(12inch x13feet) NOTE: Actual color of vinyl may vary slightly due to differences in monitor display.