HOWWOH AC 220V 10A 1CH RF 433MHz Wireless Remote Control Switch Receiver plus Transmitter Kit

Features: Working/output way: Jog/Non-Latched: - Press one button is Working /ON. - Loosen your finger on the same button is Stop/OFF. (One channel switch need one buttons remote control.) Self -lock/Self-Latched: - Press one button for one time is working/ON. - Press the same button again is stop/OFF. (One channel switch need one buttons remote control.) Inter-lock /Latched: - Press one button is working/ON. - Press another button is stop/OFF. (One channel switch need 2 buttons remote control.) Learning Method: Press the learning button 3 seconds, the indicator lights off, then you press any buttons of the remote control to transmitter signal, it means studying successfully when the indicator flash 3 times until the indicator light on. Remove code: Press the learning button about 8 seconds, the indicator turns on to off to on, it means the information that you keep have been removed successfully. Specifications: 1. Transmitter Material: Plastic + Metal Color: Black Buttons: 2 Buttons Working Voltage: DC12V Operating frequency: 433MHz Remote Control Distance: 20-200m Encode: Fixed code by soldering or EV1527 code 2. Receiver Material: Plastic + Metal Color: Black Size: 4.8×4.1×2.6cm/1.89×1.62×1.02in Working Voltage: AC220V Channel: 1CH Decode: Learning code (jog/Non-Latched, inter-lock/Latched ) Output Current: 10A Receiver Sensitivity: -105dBm Working temperature: -10??+60? Output way: Momentary, Toggle, Latched, Adjustabl Package includes: 2#: 1 X 433MHz Remote Receiver Module (including shell)(No retail package) or 3#: 1 X 433MHz Remote Control Transmitter (including battery)(No retail package) 1 X 433MHz Remote Receiver Module (including shell)