Hotfix Applicator Rhinestones GGLTECK DIY Hot Fix Rhinestone Applicator Wand Setter Tool Kit with 7 Different Sizes Tips Tweezers and Brush Cleaning kit and 2 Pack Hot-Fix Crystal Rhinestones

You can have it all! Sparkle up your world in minutes with the GLTECK Hotfix Applicator Rhinestone Setter Kit. Kindly notes: This hotfix applicator ONLY works for "hotfix" rhinestones. The "hotfix" rhinestone has glue at the bottom, which will be melted and sticky after heated up by the applicator wand. The hofix applicator CANNOT pick up the rhinestone. You need to put the hofix rhinestone to the on the target place, hold the applicator vertically for 10-60 seconds. Heating time is dependent on the stones and the apply material. Warming Tips: The applicator tip and the stones gets very hot during applying. Do not touch them with your fingers! Wait until the tip cools off before changing tips. Do not screw and unscrew the applicator tips when it is still hot. The Hot-fix Tool Set Includes: 1 * Hot-fix Applicator Wand 7 x Hot-fix Tips: - 1 x 2mm 6SS tip - 1 x 3mm 10SS tip - 1 x 4mm 16SS tip - 1 x 5mm 20SS tip - 1 x 7mm 34SS tip - 1 x 9mm flat tip - 1 x hot spot tip - 2 Rhinestone Pencil Pickers 1 *Support Stand 1 * Jewel Tweezers 1 * Cleaning Brush 1 * white rhinestones in mixed sizes 2mm 3mm 4mm 5mm 1 *12 different colors rhinestones 3mm 1* Plastic Box 1*Portable Case 1*User Manual How to Use: 1. Screw the correct tip on the applicator. 2. Plug in the applicator and fully heat the tip for 2 mins 3. Put the rhinestone on the target place, hold the applicator vertically for 10-60 seconds. 4. Move away the applicator and check the rhinestone firmly. If not,reheat the rhinestone until it sticks firmly. 5. Repeat above to make your own bling design