Description:
1.This adjustable tap wrench is a general tool for handy tapping, designed to firmly clamp the tap.
2.Straight handle design provides greater leverage, especially when using larger diameter taps.
3.Adjustable metal tap reamer wrench is used for holding larger taps in open spaces where there is a room to turn the tap wrench.
Product Description:
Type: American Standard Tap handle Wrench for Hand Using
Material: Steel?Color : Silver Tone
Overall Size(Closed)?7"x0.9"x0.314"/ 178x23x8mm(L*W*H)
Range: M1-M10?Shank Diameter : 7mm/0.27"
DIY Supplies: Metalworking
Package includes:1 X Tap Wrench
Note:
Please allow 0-1mm error due to manual measurement, please make sure you do not mind before you bid. QUALITY GUARANTEE: If there is any quality problem, please feel free to contact us. Refund or Replacement for any quality problem.
Important Tips
1.At the beginning of tapping, try to position the tap as much as possible , then apply pressure to the tap and turn the tap wrench. When tapping 1-2 turns, carefully check and correct the position of the tap. Generally, the tap position should be correct when tapping 3-4 turns of thread. Then only need to rotate the wrench, and no more pressure on the tap, otherwise the thread profile will be damaged.
2.When tapping the screw holes of plastic materials, add lubricating coolant. For steel materials, engine oil or emulsion with higher concentration is generally used. If there is higher demand, rapeseed oil or molybdenum disulfide can be used. For stainless steel, 30# engine oil or sulfurized oil can be used.
3.The force of both hands must be even when operating the tap wrench. The wrench and the tap should form an angle of 90 degrees, and the tap and the threaded bottom hole are perpendicular to each other
