Homdox 1/2 HP Submersible Sump Pump 400W Dirty Clean Water Pump 2115GPH w/ 15ft Cable and Float Switch

Why You Need a Submersible Pump? You can use the submersible pump as a helpful tool in case of flooding, a practical yard work accessory in your garden pond, or to operate a fountain. PRODUCT INFORMATION Material: Metal, Thermoplastic Weight: 4.076KG, Power: 400W Voltage/Frequency:115V/60HZ Head MAX:5M, Capacity: 8000L/H Horsepower: 1/2 HP, Max Flow Rate: 2115GPH Max Lift: 16 Feet, Max Drainage Depth: 1" Power Cord Length: 15 Feet Discharge bore: 38mm Warranty: one-yearPackage size: 37.5 x 21.5 x 16.5 cm(L X W X H) PRODUCT FEATURES Available Places: Swimming pool, Pond, flooded area. Thermoplastic body protect the metal parts from corrosion. The pump give you the excellent ability to drain cellars, swimming pool or garden ponds. Thermal overload protection make sure the pump operates within spec for longer durability. Package Content: 1 x Clean Water Pump, 1 x User Manual Operation Tips The max flow is of the pump is 2115gallon/H (8000L/H). But the height should be close to 0 meter and use the discharge port of 1.5inch. That means if you want the flow be bigger, the height of the water you put the water pump into should be lower, and using the 1.5inch discharge port.Notice:Floating ball must be kept up when the pump works. once the floating ball is down to the initial water level (about 4.7inch), the pump will automatically shut down. When the water level is below 4.7inch and above 1.57inch, you must hang the float up to continue the pump wprking. The minimum level floating ball can be drawn to is about 1.57inch.When the water level is below 4.7inch, it is best for us to take care of the pump, so that once the pump can not pump any water,the power must be cut off immediately.If not, that will lead to the coil inside the pump burned,Which causes a lot of moister internally.