Holographic Stripe Heat Transfer Vinyl 4 Sheets 10”x12”Shining Laser Iron on Vinyl HTV for DIY T-Shirts Clothes Hats and Other Textiles

How To Use: 1. Create your own design / pattern on the computer 2. Adjust proper blade depth and cutting pressure. 3. Cut with the gloss side facing down and the duller back of the vinyl facing up. 4. Weed away the excess vinyl, leaving your design on the carrier sheet. 5. Apply the design to your T-shirt with heat press at 300-320? for 10-15 seconds (if you use a home iron, press it with firm pressure). 6. Wait for the vinyl to cool and gently peel off backing after few minutes. Warm Tips: 1.Allow 24 hours before the first wash. Reverse cleaning will be better. 2.Do not bleach 3.Dry at normal setting 4.Do not dry clean 5.Do not use nylon, velvet, acrylic fabrics, leather, vinyl which will melt and ruin the material 6.Recommend using on COTTON, POLYESTER, COTTON/POLYESTER BLENDS, LYCRA fabric for best performance.