Holographic Heat Transfer Vinyl Roll for DIY T-Shirts or Fabrics Easy to Weed Iron on Vinyl HTV 12 inches x 10 Feet (Silver)

HOLOGRAPHIC HEAT TRANSFER VINYL HTV ROLLS INSTRUCTION 1. Create your own design / pattern on the computer 2. Adjust proper blade depth and cutting pressure. For glitter vinyl, we recommend to set 2-3 level blade to cutting. 3. Cut with the gloss side facing DOWN and the duller back of the vinyl facing up. 4. Weed away the excess vinyl, leaving your design on the carrier sheet. 5. Apply the design to your T-shirt with heat press at 300-320? for 10-15 seconds (if you use a home iron, press it with firm pressure). 6. Wait for the vinyl to cool and gently peel off backing after few minutes. * Recommendation: DO A TEST CUT BEFORE YOU BEGIN YOUR PROJECT Laundering * Do not dry clean *Do not bleach * Hand wash inside out after 24 hours *Please keep the heat transfer vinyl away from damp and insolation. Washing test: Home launder-ometer test: 40 degrees, more than 50 times,30 min/time.Reverse wash will be better.Wait 24 hours before the first time wash, your designs will keep the same color even after repeated washing cycles, no fade, no peel & no crack.