Holographic Heat Transfer Vinyl Roll 12 Inches x 5 Feet Iron on Vinyl HTV for DIY T-Shirts or Fabrics (Holographic Green)

INSTRUCTION 1. Create your own design / pattern on the computer 2. Adjust proper blade depth and cutting pressure. 3. Cut with the gloss side facing DOWN and the duller back of the vinyl facing up. 4. Weed away the excess vinyl, leaving your design on the carrier sheet. 5. Apply the design to your T-shirt with heat press at 300-320? for 10-15 seconds (if you use a home iron, press it with firm pressure). 6. Wait for the vinyl to cool and gently peel off backing after few minutes. Attention: Don't use steam in the iron Don't iron directly on transferred image after it has been applied to the garment * Recommendation: DO A TEST CUT BEFORE YOU BEGIN YOUR PROJECT Washing : Wait 24 hours before first washing Turn garment inside out and machine wash cold separately from other clothes Use color-safe detergent and remove promptly from the washer Do not use bleach Tumble dry low with garment turned inside out