HitLights LED Driver 100W 12V LED Dimmable Driver Transformer 110277VAC to 12V 83A DC Electric Dimmable Power Supply for 12V LED Products

Dimming Operation   1. The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase/triac dimmer. 2. Usually matching with Forward phase, leading edge , Magnetic low voltage, triac dimmers, or Reverse phase, trailing edge ,Electric low voltage Dimmers. 3. Please try to use dimmers with power at least 1.5 times as the output power of the driver.   Instruction   1) This driver should be installed by a qualified and professional person; 2) Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation. 3) Ensure that wiring is correct before testing in order to avoid light and power supply damage; 4) If driver does not work normally, or you have any questions or concerns, please contact HitLights US-Based customer service.   NOTES   1. All parameters if NOT specially mentioned are measured at 120V AC input , rated load and 25?of ambient temperature. 2. 2. To extend the driver's using life ,please reduce the loading at lower input voltage. 3. 3. Please use the shortcut: "CTRL+F" to find the matching dimmer in the below "Technical Specification" - User Guide.