HighFree Argon Flowmeter Regulator for Welding CGA580 Miller Lincoln MIG TIG, CO2 Flowmeter 10 to 60 CFH, Accurate Gauge 0 To 4000 Psi Pressure for Welder Tank

Feature: This gas regulator fits Argon, Co2 and Argon/Co2 fixed, Suitable for most argon tanks,argon hose for Miller, Lincoln and other tig mig welders. This is a great choice for tig and mig welding. Combination of regulator and flow meter as one unit. The output flow is adjustable from 10 to 60 cfh (cubic feet per hour). All the hardware of this flowmeter regulator was tight and passed the leak test. This flow meter is also perfect for homemade Kegerator, Home Brew system, etc. Great for Miller, Lincoln, Hobart, HTP, and most other Welders. Specification: Gas Service: Argon Preset: 45-50 P.S.I. Flowmeter Range 10-60 SCFH Inlet Connection: CGA-580 Connection Thread : female UNF9/16,male UNF5/8 with 1/4" barbed fitting. Flow Range: 0-25 LPM Weight: 1.7 lb. Material: Brass Package List: 1 x Argon Regulator Operating instructions: Keep hands and tool clean, oil and grease can cause an explosion on the contact with oxygen. The operator should be fully familiar with these operating instructions prior to the use of this equipment; all instructions should be adhered to when in use. Check that the flowmeter is suitable to the gas to be used. Check that the cylinder value connection is clean and undamaged, if not, you must not connect cylinder pressure regulator. Before connecting the cylinder pressure regulator, the cylinder valve should be swiftly opened and closed to dislodge water or foreign from the valve/regulator inlet seating. Do not stand in front of the cylinder valve and do not hold your hand before the cylinder valve.