HighFree 400PCS Tile Leveling System 1 8 inch Clips DIY Tiles Leveler Spacers with Tile Leveling Plier for Professional Ceramic Tile and Stone Installation

?Details: The Professional Tile Leveling System Set can be used for both wall and floor tile. Ensures that tiles remain level and eliminates lippage. Fast & easy to install & remove. This system helps to reduce the tile installation, minimizes the effort and maximizes installers productivity allowing to achieve a perfect flat. ?Steps for usage: ?Laying cement according to actual needs ?Tiles average 2 Clips on each side ?Insert wedges(not inlcude) ?It is recommended to set about 4 pcs per tile ?push the wedges with the plier ?After 24 hours, break the clips with a rubber hammer ?Warm Tips: 1?One tile is recommended to use 4 tile leveler spacers, 12'' square tiles (Laying area approximately 75 sq.ft), 6''x 20'' (Laying area approximately 62.5 sq.ft) and 12''x 24' '(Laying area approximately 150 sq.ft.). 2?If tile is large, it is recommended to use 6 spacers. The smaller the tile, the bigger the gap. 3)?Before putting thetiles, remember to erase some of the cement on the edge of tile. This will prevent the cement from being wrapped in theclamps after the clips are placed. The solidification will affect the removalof the clips. 4?Please adjust the pliers' screws to determine the pushing distance before you push the wedges. It is ensure that each wedge is pushed at the same distance, then it will be same level of tile. ?Package include: 400pcs Tile Spacers Clips 1pc Plier Not contain Wedges