HF Antenna bnc Cable KMR400 with bnc Male to bnc Male Connectors junmer KMR-400 Coaxial Cable BNC Ultra Low Loss Supports HF/VHF 3FT XRDS-RF

XRDS-RF: as a professionally manufacturer,Kmr-400 bnc male to male cable 50 ohm professionally manufactured and terminated by technicians,each bnc cable is tested and inspected.use thickening and lengthen adhesive-lined heat shrink to seal the cable to bnc male connector. Kmr-400 bnc male to bnc male antenna cable: 1.low SWR--Kmr-400 bnc solid copper conductor,not the cheap copper clad aluminium,3ft bnc low-loss coax extension cable 50 ohm SWR1.12 at VHF. 2.heavy duty--Kmr-400 coaxial cable bnc thick covering,way more sturdy then standard coax,0.41in in diameter,its a bit stiff, but that is to be expected for a cable that is 10mm in diameter. 3.can replacement--antenna bnc cable works designed for use with 50-ohm,drop-in replacement for lmr400,rg8,9913 air-dielectric type cable and ideal for rassemblies in wireless communications systems. 4.Installation Flexibility--KMR-400 bnc coaxial cable was developed to provide an extremely low loss alternative with the transmission characteristics of hardline coaxial cables and the flexibility required for vhf,hf and cb radio installation,90 degree bends in one inch or less without loss. 5.fit for--rg8 bnc male to male low loss coaxia cable used to ham radio,hf/vhf radio,antenna extension,FM satellite,wireless systems,wireless microphone system,ultra low loss supports HF/VHF Specification: Nom.HF/VHF frequency VSWR?1.15 Nom.Attenuation(3ft/HF/VHF frequency)?-0.14dB Nom.Min. Bend Radius(Install):2in Nom.Max.Operating Frequency:3000MHz Nom.Operating Temp:-40 to 80?