HEIHEI Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit with 3 8 inch Flare Inlet and Outlet Suitable for Gas Grill Fireplace and Heater Fire Pit

The HEIHEI Gas Fire Pit Valve Control Assembly Kit is suitable for most low pressure system without pilot burner for outdoor fire pit or fireplaces.The valve is a flame failure valve and have to work with thermocouple together.(Max Rating BTU is 50000.)Specifications Total Length: 600mm Head Thread Size: M8*1 Max BTU rating: 50000 Working pressure: 65mbar Voltage:?20mV Thermocouple temperature: -200 ~ 650 Degree Celsius Time For Opening Valve: Less Than 10s Operation Instructions1. Fix the valve on a plate or board of your grill or fire pit by the head screw and flange. 2. Connect your inlet and outlet hose on inlet and outlet side. (faston it tightly enough in case of gas leakage) 3. Faston the thermocouple nut M*8 on the valve end tightly 4. Connect thermocouple and end thread well 5. Open gas by correct size knob and push your valve around 5-10s till the thermocouple head is heated enough. 6. Release your hand and it work properly If when you release hand, gas valve shut off again, Please check 1).If your thermocouple is always be heated on flame 2).If the thermocouple end is well connect with valve 3).If the inlet and outlet side well connect with hose you have Package Included 1 Pc x Gas Control Valve Kit with Thermocouple and Knob Switch