Heavy Duty Chrome Plated Brass 1 4 Turn Angle Valve 1 2 NOM In x 3 8 COMP Out

This heavy duty, squared body 1/4 turn angle stop valve is the solution to long lasting, dependable shut-off valve you need to put in for your residence, commercial properties, and all places that require an angle shut-off valve 3/8-in OD compression. This valve is chrome plated, lead free, solid single piece design made for long-lasting durability and heavy duty usage. Every valve is leak-free quality controlled by the factory during the manufacturing process. For use in potable and non-potable plumbing and water distribution systems. Note to installer: This heavy duty valve is machined and crafted with very high precision and leaks after install are very rare. If leaks do occur, most likely it is due to incorrect install method. Follow this guidance during install: - DO NOT reuse old compression ring and nut. Remember to remove existing ring and nut from previous valve as this may cause improper seal and potential catastorphic flood to the property. - DO NOT overtighten the nut as this will deform the compression ring and cause a leak. - DO NOT use on copper stub-out that has been deformed or has uneven surface.