Heat Transfer Vinyl HTV 12 x10 Roll Red Easy to Weed lron on Vinyl for Cricut or Silhouette Cameo -Red-

Color:Red Application Instruction: -1.Choose your desired design , you must flip your design before cutting. -2.Reverse the pattern and cut it onto the vinyl sheet with a craft cutter. -3. Weed the excess material . -4. Spread out the target apparel and put the design on the desired position. -5. Heat and Transfer - press the iron or the heat is on the transparent polythene film(the bright side) of the design Home Iron:  -Please Heat the iron on medium setting (302?– 320?);  -Press each section of the design with medium/firm pressure for 10-15 seconds;  Heat Press:  -Preheat garment for 2-3 seconds;  -Apply design at 305?;  -Use medium pressure for 10-15 seconds;  -Wait for 15-30 seconds for the vinyl to cool down, and then peel the transparent polythene film . If any part of the iron on vinyl lifts off, repeat the steps above until you can peel off the clear backing without lifting up the vinyl.