Heat Transfer Vinyl Chrome Gold Foil Soft Metallic Vinyl Iron On HTV 12x402 Sheets 12x20 for T-Shirt

2 Sheets 10"x20" Gold Soft Foil Metallic Heat Transfer Vinyl Roll Product Details: 0.8x3.2ft/Roll The maximum use of corners of the material, to avoid waste, cost control. PU material-perfect for detailed designs easily to cut/weed. Perfectly transfer your favorite images to T-shirts,DIY party clothing, ornaments, garments, bags and other fabrics. Most fabrics are suitable(cotton/polyester/cotton blend fabric). Holographic vinyl looks different when it is viewed from the different angles. Do not use nylon, velvet, acrylic fabrics, leather, vinyl which will melt and ruin the material. Instructions: 1.Mirror/Reverse your image design. 2.Place vinyl (gloss side) onto cutting mat. 3.Cut your favorite design with the craft cutter or other carving machines. 4. Weed the excess material from the design. 5. Put the garment on the even surface and place the design on the garment at the desired position. 6. Apply the target design with iron, recommendations for transfer: (Temperature: 150?(302?) to 160?(320?) Pressure: Medium, Time: 8 ~ 15 seconds ). 7.Disperse the iron's heat evenly. Be sure to consistently apply pressure so the complete image is fully attached and prevent scorching the paper and cracking the image. 8. Wait for the vinyl to cool and gently peel off backing after few minutes. Do not dry clean. Care Instructions: Hand wash your fabric gently with mild detergent Wait 24 hours after application to wash Turn the article of clothing inside before you wash it No bleach Tips: We recommend you to perform a test prior. Adjust proper blade speed; cutting press; temperature of heat press or iron; pressure of heat press.