HDMI Extender Over RJ45 CAT5e CAT6 Cable UTP LAN Ethernet Balun Extender Repeater Cable-1080P 3D-30m

Please note: 1. If making your own patch cables make sure to use the EIA/TIA-568B standard wiring pattern 2. Make sure that the CAT5e/6 cables are plugged into the appropriate jacks. The cable you plug into 'port 1' on one side needs to be the same cable you plug into 'port 1' on the opposite side. In order to distinguish which cable is plugged into which port, you may want use different color patch cables or simply mark the ends with a distinguishing feature such as colored electrical tape. Specification: Video signal input: 0.5 -1.0 volts p-p DDC signal input: 5 volts p-p (TTL) The largest video output resolution: 1920x1080p HDMI connector: 19Pin male Video signal output: HDMI 1.2a Frequency range: 50 / 60Hz Video expansion bandwidth: 1.65Gbps / 165MHz CAT-6 cable: 30M, 1080p Power consumption: 5W Supported video formats: DTV/HDTV 1080P/1080i/720P/576P/480P/576i/480i Supported resolutions: Interlaced(50/60HZ)?480i,576i,1080i? Progressive?50/60HZ)?480p,576p,720p,1080p Product Features: Uses CAT5e or CAT6 cable to substitute HDMI and achieve long distance transmissions Comes as a pair (one sender, one receiver) HDMI pigtail cables attached to each unit, so there is no need to purchase additional HDMI cables Supported Resolutions: 480i up to 1080p Supports 1080p Resolution up to at least 100ft (30M) using CAT6 cable, and much further when using lower resolutions Supports 3D Auto adjustment of feedback, equalization, and amplification Supports uncompressed audio such as LPCM Supports compressed audio such as DTS Digital (including DTS-HD and Dolby True HD) Supports Deep Color HDCP Compliant Use 2 CAT5e or CAT6 cables (not included) No power supply is needed Package includes: 1 pair of HDMI Extender(one sender, one receiver)