HAWKUNG 3D Printer Glass Bed, 220x 220x 4 mm Upgraded 3D Printer Platform Tempered Glass Plate Build Surface with 4 Clips for Heated Bed

Specification: Material: Glass + Microporous Coatings Size: 220*220*4 mm/ 8.7*8.7*0.16 inch Temperature settings for different filaments: 1. Flexible filament: 50-70ºC ( 60 ºC is recommended ) 2. PLA:50-70ºC ( 60 ºC is recommended ) 3. PETG: 50-70ºC ( 60 ºC is recommended ) 4. Nylon:90-120ºC ( 110ºC is recommended ) 5. ABS:100-125ºC ( 115ºCis recommended ) 6. PC:100-130ºC ( 120ºC is recommended ) 7. PP:100-130ºC ( 120 ºC is recommended ) Note: 1. Please don't clean the glass with any chemical liquid as the coating will be scratched, nor scratch the surface with the sharp. 2. The glass plate will have a loss of life, just use the solid glue when the adhesion is insufficient if the coating is damaged or scratched. 3. Clean the platform surface with alcohol/water (If there is sweat or oil on the platform, which will lead to stickiness.), Suggested bed temperature may vary depends on the filament material. 4. After finish printing, the viscosity of the platform will gradually decrease as the temperature decreases, and the model can be taken after the temperature of the platform is lowered. Package include: 1 x Glass Bed (220 x 220 x 4 mm) 4 x Clips